Common failures of automatic glass cutting machines-daily maintenance of glass cutting machine failures

Automatic glass cutting machine is one of the machines for processing glass original sheets. It is easy to operate, perfect cutting efficiency and high precision, so it is highly sought after by users, so we also need to be extra careful in maintenance, so how to solve the problem of glass cutting machine What about common faults?

Guide to maintenance failure of automatic glass cutting machine.

1. It is forbidden to insert/unplug the parallel cables connected to the computer and any hardware devices (such as control cards) when the power is on.

When the machine is not used for a long time, please turn off and unplug the power cord to ensure absolute safety and prevent interference with the ground wire of the computer or glass cutting machine shell.

2. Turn on the power of the automatic glass cutting machine, restore the original point, and then manually test various functions, including supplementing cutting oil, checking whether the air pressure is normal, and whether the cutting head is worn.

3. When inputting graphics, make sure that the input graphics are within the cutting range of the glass cutting machine.

4. Check the appearance of the glass to be cut before cutting to make sure that there are no white spots and scratches.

5. Before clicking to start work, make sure that there are no people around the Y direction of the glass cutting machine. Perform other non-emergency operations after cutting.

The automatic glass cutting machine can greatly reduce our labor costs. The old saying goes that the draught does not forget the digger, so the editor hopes that we can also maintain it while using it. This issue is about the failure of the automatic glass cutting machine. I will introduce you to here, and I hope it will be helpful to everyone.