Glass drilling machine operation guide-matters needing attention in the correct use of glass drilling machine

As a major production country and development speed, the use and development of glass have been used in all walks of life, such as: architectural glass, automobile exterior window glass, display cabinet glass, etc., although it has not yet reached an indispensable place, but if we live Without glass, think for yourself what it would be like.

How glass has become so widely used is inseparable from "behind the scenes" equipment. For example, glass drilling machine is one of them. As the name suggests, glass drilling machine is a machine for drilling glass. The following editor is for everyone Popular science about how to use glass drilling, I hope it will be helpful to interested friends.

 

Precautions for glass drilling machine operation

 

At this point, I believe that some friends would like to ask whether the operation of glass drilling is difficult, and what to do if the glass is so fragile. In fact, as long as the operation is safe to use, it is not difficult to punch the glass. Just pay attention to the operation precautions of the glass drilling machine very simple.

1. Operator

 

Although the glass drilling operation is not a unique skill, the operator must undergo technical system training and obtain the accreditation to avoid unnecessary trouble in the future.

 

2. Pressure adjustment of thin and thick glass

 

When using special drilling glass, the drill bit of the vertical glass drilling machine is very easy to crush the thinner glass, so when drilling thin glass, the pressure needs to be lowered as much as possible. The editor recommends that it can be 0.18～03MPa For thick glass, it is most suitable for the pressure to rise to about 0.46MPa.

 

3. Equipment inspection

 

Before the glass drilling machine works, the operator makes a comprehensive inspection of the equipment, such as: equipment power, cooling, pneumatic and other systems.

 

4. Application of emergency stop button

 

If there is an emergency during the operation, please do not hesitate to press the "emergency stop" button or pull down the air switch immediately to troubleshoot the fault.

 

5. Wear inspection

 

Regularly observe the wear and tear of the glass drilling machine. If the wear is serious, it should be compensated in time.

 

6. Water quality inspection

 

Always ensure that the cooling water volume and water quality of the water tank meet the standards, prevent glass and grinding wheels from burning, regularly check and clean the grinding impurities of the water pipeline, and keep the waterway unblocked.

 

7. Clean up the residue

 

After the glass drilling machine completes the drilling operation, the core components of the drilling machine are cleaned in time to clean up the glass residue.

The above is the precautions for the operation of the glass drilling machine shared by the editor. I hope everyone will wear goggles and cut-resistant gloves when performing glass drilling operations to avoid personal injury. For the life of the industry and the personal safety of the operators, Please strictly observe it.